您的位置: 首页 » 法律资料网 » 法律法规 »

七台河市人民政府办公室关于印发七台河市城市供水管理办法的通知

作者:法律资料网 时间:2024-07-23 04:28:26  浏览:8452   来源:法律资料网
下载地址: 点击此处下载

七台河市人民政府办公室关于印发七台河市城市供水管理办法的通知

黑龙江省七台河市人民政府办公室


七台河市人民政府办公室关于印发七台河市城市供水管理办法的通知


七政办发〔2012〕62号



各区、县人民政府,金沙新区、开发区管委会,市政府各有关直属单位:
  现将《七台河市城市供水管理办法》印发给你们,请认真遵照执行。


  二O一二年九月二十八日


七台河市城市供水管理办法

 第一章 总 则

  第一条 为加强城市供水管理,保障城市生活、生产用水和其他各项建设用水,根据《城市供水条例》、《黑龙江省实施<城市供水条例>办法》等法规、规章,结合本市实际,制定本办法。
  第二条 在本市行政区域范围内从事城市公共供水和自建设施供水、用水及其相关管理活动,应当遵守本办法。
  本办法所称城市公共供水,是指自来水供水企业以公共供水管道及其附属设施向单位和居民的生活、生产和其他各项建设提供用水。
  本办法所称自建设施供水,是指城市用水单位以其自行建设的供水管道及其附属设施主要向本单位的生活、生产和其他各项建设提供用水。
  第三条 市城市管理行政执法局是本市城市供水的行政主管部门,负责组织本办法的实施。
  规划、水利、环保、房产、公安、卫生、价格等有关部门应当按照各自职责,共同做好城市供水管理工作。
  第四条 城市供水企业,以为用户服务的方针,不断提高服务质量和技术水平,适应城市建设和发展的需要。

第二章 供水水源利用与保护

  第五条 城市供水实行保护水源、合理开发利用水源和计划用水、节约用水相结合的原则,确保供水安全,优先保障居民生活用水,统筹安排工业用水和其他用水。
  第六条 城市供水行政主管部门应会同有关部门,根据城市建设和社会发展需要,共同编制城市供水水源开发利用规划,合理安排利用水资源。
  第七条 饮用水源保护区的划定,按照有关法律法规的规定执行。
  第八条 在饮用水水源保护区内,禁止下列行为:
  (一) 排放工业废水、生活污水、倾倒垃圾和有毒有害物品;
  (二) 建造与水利、供水工程无关的建筑物或者构筑物;
  (三) 挖沙、取土、采掘、挖窑、墓葬;
  (四) 设置码头、停靠船只、清洗车船、堆放物品;
  (五) 游泳、垂钓、捕鱼、炸鱼、养殖、狩猎、放牧;
  (六) 其他污染饮用水水源水质的行为。
  第九条 需取用城市规划区内地下水作为供水水源的,应经水行政主管部门和城市供水行政主管部门审查批准。

第三章 供水工程建设

  第十条 城市公共供水工程和自建设施供水工程的新建、改建、扩建,应当按照城市供水专项规划及其年度建设计划实施。
  第十一条 新建、改建、扩建的工程项目,应按规定建设配套节约用水设施,节约用水设施的技术指标应符合国家规定。
  第十二条 城市供水工程的设计、施工、监理应由持有相应资质证书的单位承担,并遵守国家有关技术标准和规范。
  第十三条 城市供水工程的设计方案,应征求城市公共供水企业意见,由城市供水行政主管部门会同有关部门进行审查。
  第十四条 城市供水工程竣工后,应当按照国家和省的有关规定组织验收,未经验收或验收不合格的,不得投入使用。
  第十五条 城市供水工程建设使用的供水管材、材料、设备和器具必须符合有关法律、法规和国家规定的产品质量标准。
  第十六条 新建项目的供水设施,应当按照一户一表、水表出户的要求设计、建设,符合设计规范要求的,供水企业应当提供供水服务。
  已建项目的供水设施不符合一户一表、水表出户要求的,用户应当配合供水企业进行供水设施改造。

第四章 供水设施的管理和维护

  第十七条 城市公共供水企业和自建设施供水单位对其管理的供水设施,应当按照国家规定,定期进行检测维修,确保安全运行。
  第十八条 在城市公共供水管道及其附属设施安全保护区范围内,禁止下列行为:
  (一) 修建建筑物、构筑物,堆放物料,挖坑取土,采砂、植树或者其他危害供水管道及其附属设施安全的行为;
  (二) 在城市公共供水专用配电线路和设施上搭接其他用电线路;
  (三) 在城市公共供水专用配电架空电力线路保护范围内种植可能危及电力设施安全的树木或高秆作物;
  (四)在二次供水储水设施安全保护范围内堆放、储存有毒有害物品、放射性物品、垃圾或者饲养禽畜。
  第十九条 在安全保护范围内施工作业,可能危及城市公共供水管道及其附属设施安全的,应当经城市公共供水企业同意,并按照要求采取安全防护措施。
  建设单位在施工中造成城市公共供水设施损坏的,应当及时通知城市公共供水企业修复,修复费用及造成的损失由建设单位承担。
  第二十条 因城市建设需要改装、拆除或者迁移城市公共供水设施的,应当依法报经城乡规划行政主管部门和城市供水行政主管部门批准,相关费用由建设单位承担。
  第二十一条 城市供水设施的在用管道、附件因老化、损坏等原因致使漏损或者供水水质、水压不符合标准的,管理单位应当及时维修、更换。
  表(阀)井井盖、公共消火栓等缺失、损坏的,管理单位应当及时补配或修复;不能及时补配或修复的,应当采取必要的安全防范措施。
  第二十二条 严禁损坏、盗窃和擅自启闭、移动城市公共供水设施。
  第二十三条 城市供水设施的产权划分和管理责任:
  (一)从取水口到进户总水表以前的供水管道及设施(含总水表),产权属城市公共供水企业,并由其负责维护管理;
  (二)进户总水表以后的供水管道及其设施,分别依据产权所有关系负责维护管理;
  (三)公用给水站的表前表后设施产权均属城市公共供水企业,并由其负责维护和管理;
  (四)用户用水设施由其产权人负责维护管理;
  (五)自建供水设施和深度净化管道供水设施,按产权所有关系负责维护和管理。
  第二十四条 用户用水设施竣工后,应经城市供水行政主管部门和有关部门及城市公共供水企业验收合格,并向城市公共供水企业办理供水手续。建设单位应对用户用水设施进行冲洗、消毒,经卫生部门和水质监测部门检测合格后方可正式通水。
  第二十五条 城市公共供水管道和与其连接的用户自建户外管道及其附属设施,应当经供水企业查验合格后移交统一管理。

第五章 供水用水管理

  第二十六条 城市公共供水企业和自建设施供水单位应当按照国家规定建立水质检测制度,保证供水水质符合国家规定标准,并将检测结果定期报送城市供水行政主管部门和卫生行政主管部门。
  卫生行政主管部门应当定期对供水水质进行监测,并公示监测结果。
  第二十七条 城市公共供水企业应当按国家有关规定在供水输配管网上设立供水水压测压点,做好供水水压监测工作,确保供水水压符合国家规定的标准。
  第二十八条 城市公共供水企业和自建设施对外供水的企业应当按照国家规定的供水水压标准,保持不间断供水,禁止擅自停止供水。
  因供水工程施工或者供水设施检修等原因,确需临时停止供水或者降低供水水压的,城市公共供水企业应当在抢修的同时通知用户,并向城市供水行政主管部门报告,抢修超过二十四小时仍不能恢复供水的,应当据情采取必要的应急供水措施,保证生活用水的需要。抢修时应当采取有效的安全和卫生防护措施。
  第二十九条 城市供水管道及其附属设施发生故障需要抢修时,可以先施工,后补办占道、挖道手续。抢修时必须拆除相关妨碍物的,城市公共供水企业应当及时通知产权人,抢修后应当恢复原状或者依法给予相应补偿。
  第三十条 因特殊情况正常供水无法保障时,经市人民政府批准,城市供水行政主管部门可对用水单位采取临时限制用水措施,保障城市生活必需用水。
  第三十一条 供水企业应当制定供水服务规范和重大事故、不可抗力等各种情况的应急预案,设立供水管网设施应急抢修队伍和维修服务网点,提供二十四小时服务热线和紧急抢修抢险服务。
  第三十二条 用户应当按期缴纳水费。用户对水表计量有异议的,可提出验表申请,并按验表结果核收水费。用户逾期不缴纳水费的,应当按照约定支付违约金。
  第三十三条 城市供水价格实行政府定价。城市供水价格的制定和调整,由城市公共供水企业向物价部门提出书面申请,并抄送城市供水行政主管部门,经物价部门按规定权限和程序依法审核批准后实施。
  第三十四条 任何单位和个人禁止下列行为:
  (一)在城市公共供水输配管网上直接装泵抽水或者采用其他方式盗用供水;
  (二)擅自向其他单位或者个人转供公共供水;
  (三)擅自改变用水性质。
  第三十五条 消防供水设施实行专用。公安消防机构应按季度将消防用水量通知供水企业。
  第三十六条 园林、环卫、市政等部门因作业确需用水的,应当向供水企业申请专用取水点,并报城市供水行政主管部门备案,使用部门应按规定期限向城市公共供水企业缴纳水费。
  第三十七条 工业用水和冷却用水应当采取循环用水、重复用水或其他节水措施,降低用水量。
  第三十八条 用水单位应当定期开展水量平衡测试,合理评价用水水平,经测试发现不符合有关节水规定的,应当及时采取措施,整治改进。城市供水行政主管部门可以对用水量大的单位组织水量平衡复测。
  第三十九条 城市公共供水用户需要更名、过户、销户或者改变用水性质的,应当向城市公共供水企业申请办理有关手续,结清所欠水费。城市公共供水企业能够当场办理的,应当当场办理;不能当场办理的,应当自收到用户申请之日起7个工作日内办理完毕;不能办理的,应当书面告知用户理由。

第六章 二次供水

  第四十条 新建、改建、扩建的建设工程,用水水压、水量要求超过供水管网的供水能力时,应当设置二次供水设施。
二次供水设施应当与建设工程主体工程同步设计、同步施工、同步交付使用。
  第四十一条 使用城市公共供水的用户,需新建、改建、扩建二次供水设施的,应当告知城市公共供水企业,并提供有关资料。
二次供水设施不得擅自与城市公共供水管道直接连通。
  第四十二条 使用城市公共供水的二次供水设施应当设置足够调蓄容量的储水设施,避开供水高峰时段向储水设施蓄水,以保证连续供水。
  第四十三条 使用城市公共供水的二次供水设施建设工程,建设单位组织竣工验收时应当通知城市公共供水企业参加。
  第四十四条 使用城市公共供水的二次供水设施,按照平等、自愿、协商的原则,可以移交城市公共供水企业统一管理、维护。
  第四十五条 二次供水管理单位应当保证二次供水设施完好,保证水质、水压合格。
  第四十六条 由于工程施工、设备维护检修等原因需要降压供水或暂停供水的,二次供水管理单位应当提前二十四小时通知用户;因设备故障或紧急抢修不能提前通知的,应当在抢修同时通知用户。
  停水超过二十四小时的,二次供水管理单位应当采取应急供水措施,保证居民基本生活用水需求。
  第四十七条 二次供水管理单位对二次供水水质每月至少检测一次;对二次供水设施每半年至少清洗、消毒一次,并建立清洗、消毒档案。
  第四十八条 二次供水水质受到污染时,管理单位应当立即停止供水,并组织清洗、消毒。
  第四十九条 二次供水设施清洗、消毒完毕,经依法认证的水质检测机构检测合格方可投入使用,检测结果应当向用户公布。
  第五十条 城市供水行政主管部门应当加强对二次供水设施清洗、消毒、运行的监督管理。
卫生行政主管部门应当加强对二次供水生活饮用水水质的监测,每半年至少抽检一次。

第七章 法律责任

  第五十一条 违反本办法规定的,由城市供水行政主管部门依据《城市供水条例》、《黑龙江省实施<城市供水条例>办法》的规定,予以处罚。
  第五十二条 阻挠、防碍或漫骂、殴打供水管理、作业人员或有意破坏供水设施,构成治安管理处罚的,由公安机关依据《中华人民共和国治安管理处罚法》的有关规定进行处罚,构成犯罪的,依法追究刑事责任。
  第五十三条 违反本办法规定,依法应当由水利、环保、卫生等部门处罚的,按相关法律法规规定执行。
  第五十四条 当事人对行政处罚不服的,可以依法申请行政复议或提起行政诉讼。
  第五十五条 城市供水管理部门的工作人员玩忽职守,滥用职权、徇私舞弊的,由其所在单位或者上级机关给予行政处分,构成犯罪的,依法追究刑事责任。

第八章 附 则

  第五十六条 本办法自2012年12月1日起施行。






下载地址: 点击此处下载
The Similar And Different Regulations
On Industrial Designs
Between China And Canada
He Zijing

Abstract:
With China entering WTO, more and more Chinese industrial designers want to apply internationally to register their designs outside China. This paper shows you the detailed comparison about regulations concerning industrial designs between China and Canada, gives some suggestions about the process to register internationally to protect Chinese applier. Some hints imposed on the difference between the two countries will help to improve our patent law.
KEYWORDS:
Industrial design, China, Canada
1. General introduction on industrial designs
1.1 What is an industrial design?
1.1.1 Of WIPO
An industrial design is the ornamental of aesthetic aspect of an article. The design may consist of three-dimensional features, such as the shape or surface of an article, or of two-dimensional features, such as patterns, lines or color. Industrial designs are applied to a wide variety of products of industry and handicraft. To be protected under most national laws, an industrial design must appeal to the eye. This means that an industrial design is primarily of an aesthetic nature, and does not protect any technical features of the article to which it is applied.
1.1.2 Of CHINA
Design in the Patent Law means any new design of the shape, the pattern or their combination, or the combination of the color with shape or pattern, of a product with creates an aesthetic feeling and it fits for industrial application.
1.1.3 Of CANADA
Design of industrial design means features of shape, configuration, pattern or ornament and any combination of those features that, in a finished article, appeal to and are judged solely by the eye.
1.2 Other forms of Intellectual Property
In China, Intellectual property can be generally classified as patent, copyright, trademark. Patents, or in other words, inventions-creations, mean inventions, utility models and designs. So that the designs are one of the subdivisions of patents.
Whereas, in Canada, in addition to industrial designs, there other forms of intellectual property, as patents, copyrights, and integrated circuit topographies. Hereby, patents cover new inventions (process, machine, manufacture, composition of matter), or any new and useful improvement of an existing invention. So that industrial designs have the equal statues to patents, as one of the subdivisions of intellectual property.
1.3 Why protect industrial designs?
Industrial designs are what make an article attractive and appealing; hence, they add to the commercial value of a product and increase its marketability.
When an industrial design is protected, the owner-the person or entity that has registered the design-is assured an exclusive right against unauthorized copying or imitation of the design by third parties. This helps to ensure a fair return on investment. An effective system of protection also benefits consumers and the public at large, by promoting fair competition and honest trade practices, encouraging creativity, and promoting more aesthetically attractive product.
Protecting industrial designs helps economic development, by encouraging creativity in the industrial and manufacturing sectors, as well as in the traditional arts and crafts. They contribute to the expansion of commercial activities and the export of national products.
Industrial designs can be relatively simple and inexpensive to develop and protect. They are reasonably accessible to small and medium-sized enterprises as well as to individual artists and craftsmen, in both industrialized and developing countries.
1.4 How can industrial designs be protected?
In most countries, an industrial design must be registered in order to be protected under Industrial Design Law. As for China, the regulations on design are under the Patent Law of People’s Republic of China (PRC) and its implementing regulations; As for Canada, The Industrial Design Act and Industrial Design Regulations details the regulations that govern design rights. As a general rule, to be registerable, the design must be “new” or “original”. Different countries have varying definitions of such terms, as well as variations in the registration process itself. Generally, “new” means that no identical or very similar design is known to have existed before.
Depending on the particular national law and the kind of design, an industrial design may also be protected as a work of art under copyright.
2.The main difference concerning registration
2.1 When to file an application
There is no time limit for filing an application as long as the design had never been published. The term “published” means that the design has been made public (even to your neighbors) or offered for commercial sale or use anywhere in the world. It is best to file an quickly as possible if publication has occurred.
In china, an design application does not lose its novelty where, within six months before the date of filing, one of the following events occurred: [1] where it was first exhibited at an international exhibition sponsored of recognized by the Chinese Government;[2]where it was first made public at a prescribed academic or technological meeting;[3]when it was disclosed by any person without the consent of the applicant.
In Canada, the design shall be refused to be registered if the application is filed more than one year after the publication of the design in Canada of somewhere.
2.2 who can apply?
Only the proprietor of a design may apply for and obtain registration for an industrial design both in China and Canada, while there exists little difference between the two countries on the question that who can be defined as proprietor.[1] usually you are considered the proprietor if you have created the design;[2] if you work together with other person to creat a design, you should file for registration as joint proprietors ( unless you are all working under contract or commission );[3] if you have acquired ownership of a design, then you may apply;[4] if you are employee of a company and develop design as part of your employment, then the employer may be the proprietor. In that case, only the employer may apply in Canada; while in china, the entity and the inventor or creator may enter into a contract in which the right to apply for and own the exclusive right is provided for;[5] if you have been hired under contract to develop design for someone else, then that person is the proprietor and is the only one entitled to apply for registration in Canada; whereas in that case in China, the right to apply for registration belongs, unless otherwise agreed upon, to the entity or individual that made the design.
2.3 What requirements to make designs registerable?
In Canada, the minister shall register the design if the minister finds that it is not identical with or dose not so closely resemble any other design already registered as to be confounded therewith, and shall return to the proprietor thereof the drawing or photograph and description with the certificate required.
In China, any design for which patent fight may be granted must not be identical with and similar to any design which, before the date of falling has been publicly disclosed in publications in the country or abroad or has been publicly used in the country, and must not be in conflict with any prior right of any other person.
2.4 What you cannot register?
In Canada, you cannot register the following under the Industrial Design Act: [1] Designs that are utilitarian only and which are not intended to provide visual appeal; [2] Designs that have no fixed appearance; [3] Designs for components that are not clearly visible; [4] a method of construction; [5] an idea; [6] materials used in the construction of an article; [7] the useful function of the article; or [8] color.
In China, for any of the following, no patent right shall be granted: [1] scientific discoveries;[2] rules and methods for mental activities;[3] methods for diagnoses or for the treatment for the diseases;[4] animal and plant varieties;[5] substances obtained by means of nuclear transformation.
From the above regulations, we can see that the Chinese regulations is more generic for all of the three types of creation-inventions; and the Canadian’s is more special in detail on designs. So we should absorb some of them in our implementing regulations of patent law.
2.5 searching of office record prior to filing an application
Prior to filing an application, you may wish to conduct a search of office records in order to better determine whether your design is truly new and original. This will give you the opportunity to see other registered designs. You should also keep your design confidential.
2.6 How long the process takes?
In Canada, the Office dose not register any design until six months after the date of filing. Normally it takes between eight and twelve months to have your application examined. While in china, there is no such kind of provisions concerning the term of process of designs.
2.7 Duration of protection
Both in the two countries, duration of protection of industrial designs is for ten-year term, while the beginning date is quite different. In Canada, it is the date of registration-usually six months after the date of filing; in china, it is the date of filing. Once the ten-year term has expired, anyone is free to make, import, rent or sell etc., the designs.
2.8 Extension of protection
In Canada, your application must include a description which identifies the features that constitute the design since the court may use your description to help determine the limits of protection for your design, you should word your description with care and precision. If your description is too broad, you may over-extend the scope of the design, and it may be impossible to enforce. If it is too narrow, you may limit the scope of the design or leave out features that you intended to protect.
论经济法与商法、行政法、社会法的区别与联系
 
邓久发


  自改革开放以来, 经济法冲破重重障碍, 日趋勃兴, 对我国的经济发展起到了极大的作用。然而, 近年来仍然出现很多对经济法的错误认识,有的认为经济法是“经济行政法”而属于行政法, 有的认为它仅是商法、社会法的一部分, 而不认为经济法是一个独立的法律部门。经济法与商法、行政法、社会法的关系被严重混淆了,因此笔者就此谈谈自己的拙见,以其抛砖引玉。
  一、经济法与商法、行政法、社会法的差异
  1、调整的对象和保护利益不同
  经济法是国家为保障社会整体经济利益, 实现经济协调发展而规制经济运行行为的法律规范。它以社会整体经济利益为保护对象, 运用综合调整手段来保障社会经济的协调发展。经济法并不保护某个特定的利益, 而是站在全局以保护一个社会进步所必须的利益。这种利益, 实质是经济发展和社会发展所必需的环境。其保护的是广泛的社会经济利益。
  商法是调整营利性主体在商事经营过程中所发生的商事关系,主要是由商事交易习惯形成的商品交换规则,商法可以视为民法的特别法, 因此, 它所保护的利益也是个人利益。
行政法主要是维权法和限权法,即维护国家公权力及限制国家公权力的法。因此, 行政法保护的利益主要是公共利益。
  社会法的调整对象主要有劳动关系和社会保障关系, 其中基本不涉及经济关系。社会法的目的在于保护公民的社会权利, 尤其是保护弱势群体的利益以及保障社会安全和社会公平。
  2、本质功能差异
  经济法以社会整体经济利益为保护重心,为解决民商法、行政法均无法解决的社会经济问题而产生。它的本质是国家管理经济的法, 是平衡协调国民经济运行的法。
  商法是私法, 也是权利法。它站在当事人平等这一平面上对商品关系加以保护, 其功能主要是维护民事主体的人身权利和财产权利。
  行政法保护的是国家公共利益。它本质是公法, 以维护、限制国家权力为其功能。行政法一方面对行政权力有效行使起保障作用。另一方面行政法对行政权进行监督和限制, 防止政府机关及其工作人员违法、失职、越权和滥用权利以保护公民、组织合法权益。
  社会法的功能主要是社会功能。社会法在缓和社会矛盾、维护社会稳定方面能够发挥积极作用,社会法体现“公平优先, 兼顾效率”的原则。通过公权力的介人来保护弱者的利益, 解决社会问题和矛盾,防止社会严重分化,维护社会安定和团结。
  因此,经济法与民法、商法、行政法保护的利益和功能存在根本的差异,经济法既不属于商法, 更不属于行政法、社会法,它应是独立的法律部门。
  二、经济法与商法、行政法、社会法的联系
  1、商法和经济法都是为满足市场经济需要而产生的, 具有本质上的亲缘性, 二者总体上具有一致性、互补性。商法多是通过其任意性规范, 体现“无形之手”的要求, 强调“市场机制的内部化”, 充分发挥市场主体的能动性, 导向市场主体自觉地遵守市场规则, 促进市场竞争, 追求经济效率;经济法多是通过强行性规范, 强调“市场机制的外在化”,提供具有干预性、宏观性、整体性、政策性、公法性的规则,解决市场失灵,促使国民经济持续快速健康地发展。很多情况下由市场机制内在解决市场失灵需要较长的时间,为了能够尽快形成公平和自由竞争的社会基础, 并尽可能增强整体经济效益, 需要政府对市场的介入和规制,这就要求商法与经济法优势互补、共同发挥作用,保障市场经济的健康有序发展。
  2、经济法与行政法之间是角色分工和功能互补。这种分工与互补的关系,是实现经济秩序稳固所必不可少的。离开任何一方,要么市场主体恣意妄为,要么行政机关滥用权力,国家管理经济所期望的秩序和自由将无法实现。行政法关注经济管理主体,则经济法必然要关注管理相对人;经济法的“干预”必然要求行政法的“控权”;经济法以实现市场主体权利义务的公平和行政机关行政职权合理配置为己任,则行政法必然倾心关注行政权力行使的控制,以保证实体权利义务的实现。
  3、经济法和社会法各自作为独立的法律部门,它们既存在共性,又不能相互取代,只有二者协调发展,各尽其职,才能构建和谐的法律体系。经济法对国民经济发展的促进作用,使整个社会的物质资料大大丰富,从而为社会每一个成员的权益保障提供良好的物质基础,而社会法对社会问题的解决,也势必使国民经济在和谐的社会环境中健康发展。两者各有各的优势,将他们紧密结合, 发挥其良性互动、作用互补,对实现我国经济发展和社会稳定的“双赢”局面意义重大。
  综上所述,经济法与商法、行政法、社会法,它们虽然是各自独立的法律部门, 但并非纯然无涉, 而是应相互配合, 相互辅助, 从社会生活的各个方面来保障社会经济健康发展。


荔浦县人民法院 邓久发
联系电话:13457399886
2010年11月1日